Pollen morphology and its taxonomic potential in some selected taxa of Caesalpiniaceae observed under light microscopy and scanning electron microscopy.

Pollen micromorphology is not only used to check the functional and structural evolution in plants but also to solve the taxonomic problem related to the classification of plants. Therefore, keeping in view the significance of pollen traits, selected taxa of the subfamily Caesalpiniaceae was collected from different geographical regions of Pakistan. The species were then analyzed under both light microscopy and scanning electron microscopy techniques to investigate the importance of micromorphological characters of pollen in the identification and classification of species. Great variation was recorded in equatorial shape, surface ornamentation, tectum, polar diameter, equatorial diameter, and exine thickness. However, little variation was observed in pollen type, polar shape, and fertility of pollen. The equatorial shape of five types was observed: prolate, prolate-spheroidal, spheroidal-subprolate, subspheroidal-prolate, and subspheroidal. Four types of surface ornamentation, psilate, granulate, clavate, and perforate, were recorded. Tectum of five types, intactate, reticulate regulate, medium reticulate, tactate, and striate, was observed. Sexine was thicker than nexine in all studied species. The largest polar diameter was observed in Caesalpinia pulcherrima 64.1 µm while the smallest in Parkinsonia aculeata 26.1 µm. The largest equatorial diameter was found in C. pulcherrima of 70.25 µm whereas the smallest in P. aculeata 27.57 µm. All the pollens analyzed were tricolporate. All studied species have a fertility ratio of more than 90%. A taxonomic key was developed to show the variation in pollen features and delimit species for the correct identification. In conclusion, the pollen traits were found useful to define species boundaries at various taxonomic ranks and will strengthen the taxonomy of this subfamily. Besides, this study also explored the palynological traits and their implication in the taxonomy of the subfamily Caesalpiniaceae.

Pollen morphology of family Solanaceae and its taxonomic significance.

The pollen micro-morphology of family Solanaceae from the different phytogeographical region of Pakistan has been assessed. In this study, thirteen species belonging to ten genera of Solanaceae have been studied using light and scanning electron microscopy for both qualitative and quantitative features. Solanaceae is a eurypalynous family and a significant variation was observed in pollen size, shape, polarity and exine sculpturing. Examined plant species includes, Brugmansia suaveolens, Capsicum annuum, Cestrum parqui, Datura innoxia, Solanum lycopersicum, Nicotiana plumbaginifolia, Petunia hybrida, Physalis minima, Solanum americanum, Solanum erianthum, Solanum melongena, Solanum surattense and Withania somnifera. The prominent pollen type is tricolporate and shed as a monad. High pollen fertility reflects that observed taxa are well-known in the study area. Based on the observed pollen traits a taxonomic key was developed for the accurate and quick identification of species. Principal Component Analysis was performed that shows some morphological features are the main characters in the identification. Cluster Analysis was performed that separate the plant species in a cluster. The findings highlight the importance of Palyno-morphological features in the characterization and identification of Solanaceous taxa. It is concluded that both LM and SEM significantly play a key role in correct identification of taxa studied.

Determination of antimicrobial and antioxidant potential of agro-waste peels.

Natural products from plants are pulling in more interest in exploration due to their therapeutic properties like, mainly because of the drug-resistance in microbes against synthetic drugs. Thus, the present study was designed to assess the antimicrobial and antioxidant actions of some Agro-waste (garlic, ginger, onion, potato) peel extracts. Ginger peel extracts exhibited the highest FRAP (0.273±0.044 mm Fe2+ Eq/g dry weight) while garlic peel extracts exhibited the highest TAC (0.47±0.0452 mm AAE/g dry weight) values among all selections. The antimicrobial activity of the peels was evaluated against different pathogenic bacterial and fungal strains i.e.; Escherichia coli, Bacillus megaterium, Bacillus cereus, Staphylococcus aureus, Colletotrichum falcatum, Fusarium moniliforme, and Rhizoctonia solani. Among all extracts, ginger peel extracts exhibited maximum inhibition against all bacterial strains, while onion peel extracts exhibited zero inhibition against any bacterial strains. All extracts exhibited maximum inhibition against Staphylococcus aureus except onion peel extracts. Positive inhibition against all fungal strains was observed for all samples, with maximum inhibition against Colletotrichum falcatum. The outcomes of the study, therefore reveal that Agro-wastes have a powerful antimicrobial and antioxidant potency and thus can be used for many medicinal purposes, which will likewise be helpful in waste management and environmental safety.

Microscopic investigation of pollen morphology of Brassicaceae from Central Punjab-Pakistan.

The intention of the current study is to provide an account on the palynological features of Brassicaceae from Central Punjab-Pakistan as a basis for future studies. Different morpho-palynological characteristics both qualitative and quantitative were analyzed during this research which includes shape of pollen, diameter of pollen, P/E ratio, exine sculpturing, thickness of exine, type of pollen, shape and size of lumens, and thickness of murus. Taxonomic keys were also constructed based on pollen morphological characters for correct identification of species. This study aims to provide detailed information of pollen diversity and their exine structure based on both qualitative and quantitative characters by using Light microscopy and Scanning electron microscopy. Shape of pollen is mostly prolate, but some species also have sub-prolate to spheroidal prolate types. Exine ornamentation in most species was reticulate, whereas micro reticulate (one species) and coarsely reticulate (one species) exine also observed in some pollen. All the pollen mentioned in this study have tricolpate apertures. Variation found in thickness of exine and other characters proved to be helpful at generic and specific level. The results reinforced the significance of pollen morphological features of family Brassicaceae and aid for valuable taxonomic tool in plant systematics.

Taxonomic study of one generic and two new species record to the flora of Pakistan using multiple microscopic techniques.

Recent field exploration and collections has led to the findings of several new species in Pakistan. Here we reported two new species Ajuga reptance L and Sphagneticola trilobata (L.) Prusk for the first time in Pakistan flora as these species were neither listed in any other literature nor identified before in Pakistan. These species were found as a result of taxonomic studies performed in the year 2019 in District Rawalpindi and Islamabad, Pakistan. Microscopic techniques were used for the confirmation of foliar epidermal and pollen micromorphological features. Detailed study (morphological, palynological, and foliar epidermal) was provided for the correct identification and delimitation of the species using both light and scanning electron microscopy. Morphological results were compared with the flora of Taiwan and China.

Morpho-palynological investigations of natural resources: A case study of Surghar mountain district Mianwali Punjab, Pakistan.

Surghar mountain belt has comparatively less natural resources of floral diversity because it is composed of minerals of different kinds making it less favorable for the growth of different vegetation. The pollen morphology of some selected plants from Surghar belt Mainwali has been evaluated. The pollen grains were measured and demonstrated using scanning electron microscopy (SEM). The examined plant specimens have a difference in size, shape, polarity, and their exine ornamentation. The pollen taxa show a huge variation in size and sculpture. Pollen fertility has also been estimated, shows that the selected plants are well-known in the Surghar belt. The need of the hour is to conserve these plants having a higher fertility rate to cope with the deforestation in an area. The conclusion does not favor theories in which deforestation results in fast growth in population. It shows that the irrational management and unlawful cutting down of woods neglected by the forest department are the main causes of deforestation in the mountain belt of Mianwali. The findings show the importance of morphological characteristics in the identification of natural resource species in the area.

Palyno-morphological investigations of halophytic taxa of Amaranthaceae through SEM from Salt range of Northern Punjab, Pakistan.

The pollen morphology of 11 salt tolerant plant species of family Amaranthaceae from the salt range of Northern Punjab, Pakistan has been studied. The palyno-morphological characters were examined using light and scanning electron microscope. The examined all salt tolerant species have a slight difference in size but have similarity in shape, pore ornamentation, and polarity. The observed morphological characters of pollen grains were pollen symmetry, size, shape, pore ornamentation, pore size, number of pores, exine thickness, polar and equatorial diameter and, P/E ratio. Apolar type of pollens has been observed in all species. Shape of pollens was spheroidal. Exine sculpturing of pollen grains was scabrate (six spp), microechinate (four spp), and microechinate-scabrate (one spp). Different pori numbers were observed in different species. The pantoporate aperturate and sunken pore ornamentation have been reported in all species. A pollen taxonomic key was developed using examined morphological characters for the accurate identification of halophytic taxa. The high fertility and low sterility of pollens confirmed that the selected halophytes are well-established in the salt region. The findings highlight the taxonomic significance of pollen morphology in correct identification and differentiation of salt tolerant plant species.

Role of trees in climate change and their authentication through scanning electron microscopy.

Climate change is the most realistic theory of this era. Sudden and drastic changes are happening on the earth and the survival of mankind is becoming questionable in the future. The plants play the key role in controlling the climate change. The study emphasizes on role of trees in the cop up or damaging the climate of this earth, whether they are medicinal trees or economically important trees. Due to the overgrazing and intense deforestation the climate is being affected hazardously. The global warming phenomenon is occurring due to the less availability of trees and more carbon dioxide in the atmosphere. In total 20 plants were collected from across the Pakistan on the basis of their abundance and their key roles. Out of which seeds of eight plants were scanned through scanning electron microscope for correct authentication and importance of these medicinally important trees in mitigating the climate change. RESEARCH HIGHLIGHTS: The role of forest sector in the climate's change mitigation. Medicinally and economically important tree species across Pakistan. By using SEM, Ultra seed sculpturing features as an authentication tool. To formulate some policies to stop or control deforestation.

Palyno-anatomical studies of monocot taxa and its taxonomic implications using light and scanning electron microscopy.

Palyno-anatomical study of monocots taxa using Light and Scanning Electron Microscopy (SEM) was first time conducted with a view to evaluating their taxonomic significance. Studied plants were collected from different eco-climatic zones of Pakistan ranges from tropical, sub-tropical, and moist habitats. The aim of this study is to use palyno-anatomical features for the correct identification, systematic comparison, and investigation to elucidate the taxonomic significance of these features, which are useful to taxonomists for identifying monocot taxa. A signification variation was observed in quantitative and qualitative characters by using the standard protocol of light microscopy (LM) and SEM. Epidermal cell length varied from maximum in Allium griffthianum (480 ± 35.9) µm at the adaxial surface to minimum in Canna indica (33.6 ± 8.53) µm on abaxial surface. Maximum exine thickness was observed in Canna indica (4.46) µm and minimum in Allium grifthianum (0.8) µm. Variation was observed in shape and exine ornamentation of the pollen, shape of the epidermal cell, number, size, and type of stomata, guard cell shape, and anticlinal wall pattern. Based on these palyno-anatomical features a taxonomic key was developed, which help in the discrimination of studied taxa. In conclusion, LM and SEM pollen and epidermal morphology is explanatory, significant, and can be of special interest for the plant taxonomist in the correct identification of monocots taxa.

Microscopic investigations of some selected species of Papilionaceae through SEM and LM from Skardu valley, northern Pakistan.

Pollen morphology of 10 species and foliar epidermal anatomy of eight species of Papilionaceae from Skardu valley, northern Pakistan has been estimated for the first time. The present study was commenced with an aim to provide a detailed account of the pollen morphology by scanning electron microscopy and foliar epidermal anatomy by light microscopy. The pollen aperture was tricolporate with reticulate exine in the selected species. Stomata types are actinocytic, paracytic, and anomocytic. Irregular or polygonal with undulate or straight walls, epidermal cells were reported. A unique diversity was observed in the foliar trichomes that show the taxonomic significance of the discrimination of taxa. Non-glandular trichomes were observed in the selected species which are unicellular with thin, long and pointed apical cells. Pollen and foliar micro morphological characters proved to be helpful for the identification of taxa at a specific level.

Microscopic investigations and pharmacognostic techniques used for the standardization of herbal drug Nigella sativa L.

A comprehensive account on standardization of herbal drug Nigella sativa L. (Tukhm-e-Kalonji) by using microscopic as well as pharmacognostic parameters. In the field of herbal medicines, the main issues are quality, purity, and effectiveness, as in many cases herbal drugs are knowingly or unknowingly substituted or adulterated with similar species or varieties. In herbal market the seeds of N. sativa are commonly adultered with seeds of Allium cepa L. intentionally or accidentally due to their similar morphology. In the present study, the microscopic characterization of herbal drug was done by morphological, palynological, and anatomical features. A great diversity was found in anatomical features of two species, as irregular epidermal cells, actinocytic stomata, and nonglandular trichomes were found in N. sativa while in A. cepa epidermal cells were rectangular in shape, stomata type was paracytic, and trichomes were absent. Pharmacognostic characterization was made by fluorescence analysis and physiochemical parameters. Physicochemical parameters like moisture content, total ash, acid insoluble ash, water soluble ash, and water insoluble ash were also evaluated. The above parameters, being reported to the first time for the studied plant species, and are significant towards establishing the microscopic and pharmacognostic standards for future identification and authentication of genuine herbal drug. RESEARCH HIGHLIGHTS: Microscopic Investigations for the standardization of herbal drug Nigella sativa L. (Tukhm-e-Kalonji). Pharmacognostic techniques are potentially significant for the standardization of herbal drug Nigella sativa in comparison with its adulterant. Useful for preparation of standards for herbal pharmacopeia.

Identification of monocot flora using pollen features through scanning electron microscopy.

Pollen used to track structural and functional evolution in plants as well as to investigate the problems relative to plant classification. Pollen characters including ornamentation, shape, apertural pattern, pollen symmetry, colpus length, width, and margins used to detect the similarities and dissimilarities between genera and also species of the same genus. In this study pollen features of 20 monocot species belonging to 15 genera of the Amaryllidaceae, Asparagaceae, Iridaceae, Ixioliriaceae, Liliaceae, and Xanthorrhoeaceae were studied using scanning electron microscopy (SEM) and light microscopy (LM). In this study two species that is Zephyranthes citrina and Tulbaghia violacea were reported for the first time from Pakistan. Pollen grains were visualized with LM. Non-acetolyzed and acetolyzed pollen were examined using SEM. A taxonomic key was developed to highlight the variation in pollen features in order to make their systematic application for correct species identification.

Microscopic investigations of palynological features of convolvulaceous species from arid zone of Pakistan.

The pollen morphology of some species of glamorous family Convolvulaceae from arid zones of Pakistan has been evaluated. The pollen grains were acetolyzed, measured, described qualitatively, and illustrated using Light microscopy and scanning electron microscopy (SEM). The examined species have differences in shape, size, polarity and exine ornamentation, confirming the eurypalynous character. The pollen types varies from psilate to echinate and colpi to tricolporate, tetracolporate and pantocolporate. Exine ornamentation was exposed as perforate, reticulate and echinate. Spine morphology and exine sculpture are vital for the distinction of species. Pollen fertility shows that selected plants species are well-known in the Arid Zone. A taxonomic key is prepared to use these variations in the identification of species. Statistical analysis by using the Software XLSTAT exhibited that some morphological features is the main characters in identification of the taxa. These studied taxa were separated from each other using cluster Analysis. Our results constructed on MVSP ver. 3.22 software analyses that show morphological explanation; thus, the results highlight the importance of pollen morphology in the identification and characterization of species of the family convolvulacae in arid zone.